Click on images to enlarge



1) Clean area to be repaired of any loose material or debris

2) Pour the material directly from the bag into the hole.



Water is no problem.  There is no need to even sweep any water from your patch, provided it is clear of debris.

3) Add material up to a depth of approximately 2 inches.

4) When you have a 2 inch base, use the QPR® Tamp Tool to compact the material and create an even and solid surface.

5) Reapply in 2 inch increments until repair area is filled.

6) QUICK TIP:


If you need a faster setup time, sprinkle mortar dust or Portland cement over the repair area prior to compaction.

7) When the hole is filled, apply a small crown to repair area to allow for additional compaction.

8) Use your QPR® Tamp Tool or a truck tire to compact the repair and you are open to traffic immediately.