Easy How-to guides. Roadshop

HOW TO Repair Potholes
 ShareThis  

 Click on images to enlarge
Clean area to be repaired of any loose material or debris 1) Clean area to be repaired of any loose material or debris
Pour the material directly from the bag into the hole 2) Pour the material directly from the bag into the hole.

Water is no problem.  There is no need to even sweep any water from your patch, provided it is clear of debris.
Add material up to a depth of approximately 2 inches 3) Add material up to a depth of approximately 2 inches.
Use the QPR® Tamp Tool to compact the material 4) When you have a 2 inch base, use the QPR® Tamp Tool to compact the material and create an even and solid surface.
Reapply in 2 inch increments until repair area is filled 5) Reapply in 2 inch increments until repair area is filled.
If you need a faster setup time, sprinkle mortar dust or Portland cement 6) QUICK TIP:

If you need a faster setup time, sprinkle mortar dust or Portland cement over the repair area prior to compaction.
When the hole is filled, apply a small crown 7) When the hole is filled, apply a small crown to repair area to allow for additional compaction.
Use your QPR® Tamp Tool or a truck tire to compact the repair 8) Use your QPR® Tamp Tool or a truck tire to compact the repair and you are open to traffic immediately.
web design & development
Stand With Haiti